Products
M23 Series Dampers
1. Speed characteristics
The torque of the rotary damper changes according to the change of the rotation speed. The law of change is: the speed increases, the torque also increases. The speed slows down, and the torque drops with it.
▲The torque at start is different from the standard torque.
2. Temperature characteristics
The torque of the rotary damper changes according to the temperature of the operating environment. The change rule is: when the ambient temperature increases, the torque decreases, and when the ambient temperature decreases, the torque increases. This is because the viscosity of the viscous oil in the damper also changes when the ambient temperature changes. However, when the ambient temperature returns to normal temperature, the torque also returns to its original value.
Learn more
M50A0 series
Buffer characteristics
1. Speed characteristics: The torque of the rotary buffer changes according to the change of the rotation speed. Torque increases as you go faster, and torque decreases as you go slower.
2. Temperature characteristics: The torque of the rotary buffer also changes according to the change of the ambient temperature. The torque decreases when the ambient temperature increases, and the torque increases when the ambient temperature decreases. This is because the viscosity of the viscous oil changes when the ambient temperature changes. But when the ambient temperature returns to normal temperature, the torque will also return to its original value.
Learn more
Q47A0 Series Rotary Damper
Instructions for use
① This buffer has no axial support design, so be sure to consider other axial support issues during installation.
②When inserting the shaft into the Q47A0-R/L shock absorber, insert it while turning it in the no-load direction of the shock absorber. (Please note: the buffer may be damaged if inserted hard)
③When using the buffer, please use the square shaft with the specified tolerance. When installing, try to keep the minimum gap between the shaft holes. If there is a gap, the fall buffering effect of the cover will be affected.
Learn more
Q57A0 Series Rotary Damper
① Speed characteristics: The torque of the disk-type rotary buffer changes according to the change of the rotation speed. The changing law can be seen in the lower right figure, the torque increases when the speed is increased, and the torque decreases when the speed is slowed down. The torque in the manual is the torque when the cover is rotated at 20 rpm. When the cover is rotated and dropped from the vertical to the horizontal direction, the torque will be smaller than the calibration value due to the slow rotation speed when it starts to fall.
② Temperature characteristics: The torque of the disk-type rotary shock absorber also changes according to the change of the ambient temperature. The change rule can be seen in the lower right figure. When the ambient temperature increases, the torque decreases, and when the ambient temperature decreases, the torque increases. This is because the viscosity of the viscous oil changes when the ambient temperature changes. But when the ambient temperature returns to normal temperature, the torque will also return to its original value.
Learn more
S13A0 Series Dampers
1. Speed characteristics: The torque of the rotary buffer changes according to the change of the rotation speed. Torque increases as you go faster, and torque decreases as you go slower.
2. Temperature characteristics: The torque of the rotary buffer also changes according to the change of the ambient temperature. The torque decreases when the ambient temperature increases, and the torque increases when the ambient temperature decreases. This is because the viscosity of the viscous oil changes when the ambient temperature changes. But when the ambient temperature returns to normal temperature, the torque will also return to its original value.
Learn more
Y12A0 series rotary damper
1. Speed characteristics: The torque of the rotary buffer changes according to the change of the rotation speed. Torque increases as you go faster, and torque decreases as you go slower.
2. Temperature characteristics: The torque of the rotary buffer also changes according to the change of the ambient temperature. The torque decreases when the ambient temperature increases, and the torque increases when the ambient temperature decreases. This is because the viscosity of the viscous oil changes when the ambient temperature changes. But when the ambient temperature returns to normal temperature, the torque will also return to its original value.
3. Try to keep the minimum gap between the shaft holes during installation. If there is a gap, the buffering effect will be affected.
Learn more
Y13D0 series rotary damper
Instructions for use
①The matching gap between the rotating shaft hole and the matching parts should be minimized. If there is a gap, the buffering effect of the damper will also be affected;
②The rotation angle of the rotary damper is 300°. If the rotation exceeds the angle, the damper itself will be damaged. Please design a stop positioning mechanism externally;
Learn more
N12 series rotary buffer
1. The closed position shown in the figure is the buffer end position, the torque output of the buffer is the largest at this angle, and this position is the buffer end installation reference.
2. The angle between the rotation flat installation reference and the housing boss is 0°.
3. The rotation angle of the buffer is 120°. If the rotation exceeds the angle, the buffer itself will be damaged. Please design a stop positioning mechanism externally.
4. Please minimize the gap between the rotating shaft hole and the mating parts. If there is a gap, the speed of the rotation buffer will be affected.
Learn more
N16A0 series rotary buffer
When the N16A0 series rotary buffer starts to fall from the vertical position as shown in Figure A to the horizontal position, since the designed torque is the weakest at the starting position, the torque gradually increases with the rotation of the buffer angle, so the action of the cover can be slow at the end. close. As shown in Figure B, when the lid starts to fall from the horizontal position, the torque generated by the gravity of the lid is zero in the vertical direction, and the torque of the buffer is the largest in the final position, so the lid cannot be fully closed.
Learn more
Y12C0 series damper
1. Speed characteristics: The torque of the rotary buffer changes according to the change of the rotation speed. Torque increases as you go faster, and torque decreases as you go slower.
2. Temperature characteristics: The torque of the rotary buffer also changes according to the change of the ambient temperature. The torque decreases when the ambient temperature increases, and the torque increases when the ambient temperature decreases. This is because the viscosity of the viscous oil changes when the ambient temperature changes. But when the ambient temperature returns to normal temperature, the torque will also return to its original value.
3. Try to keep the minimum gap between the shaft holes during installation. If there is a gap, the buffering effect will be affected.
Learn more
N18D1 series buffer
When the N18 series rotary buffer starts to fall from the vertical position as shown in Figure A to the horizontal position, since the designed torque is the weakest at the starting position, the torque gradually increases with the rotation of the buffer angle, so the action of the cover can be slow at the end. close. As shown in Figure B, when the cover starts to fall from the horizontal position, the torque generated by the gravity of the cover is zero in the vertical direction, and the torque of the buffer is the largest in the final position, so the cover cannot be fully closed.
Learn more
© 2026 Nimbr Technology Co.,Ltd. All Rights Reserved.