D45A0 Rotary Buffer
D45A0 Rotary Buffer
D45A0 Rotary Buffer
+
  • D45A0 Rotary Buffer
  • D45A0 Rotary Buffer
  • D45A0 Rotary Buffer

D45A0 Rotary Buffer

D45A0 Rotary Buffer

When the D45 series rotary buffer starts to fall from the vertical position as shown in Figure A to the horizontal position, since the designed torque is weak at the starting position, the torque gradually increases with the rotation of the buffer angle, so the action of the cover can be closed slowly afterward. . As shown in Figure B, when the lid starts to fall from the horizontal position, the torque generated by the gravity of the lid is zero in the vertical direction, and the torque is large at the rear position of the buffer, so the lid cannot be completely closed.
  • Price
  • Minimum Quantity
    1
  • Quantity
SKU Standard Type


TAG:

Category:

Rotary buffer

model reverse torque Rotation direction Rotation direction

D45A0-R503

5.0N.m

Clockwise damping

30kgf.cm

D45A0-L503

50±20kgf.cm

Anti-clockwise damping

30kgf.cm

D45A0-R703

7.0N.m

Clockwise damping

30kgf.cm

D45A0-L703

70±20kgf.cm

Anti-clockwise damping

30kgf.cm

D45A0-R104

10.0N.m

Clockwise damping

30kgf.cm

D45A0-L104

100±20kgf.cm

Anti-clockwise damping

30kgf.cm

Note: 1) The marked torque is the test data when the standard load falls slowly at 15° per second and the temperature is 23°C;

2) Special torque can be provided by changing the viscosity of the buffer grease.

 

use angle

180°

Operating temperature range

-5~60℃

Material of product housing and cover Zinc aluminum alloy
Rotary shaft material

S25C

use oil silicone oil

 

Dimensions

 

0

 

Instructions for use
1. When the D45 series rotary buffer starts to fall from the vertical position as shown in Figure A to the horizontal position, since the designed torque is weak at the starting position, with the rotation of the buffer angle, the torque gradually increases, so the action of the cover can be delayed. Close slowly. As shown in Figure B, when the cover starts to fall from the horizontal position, the torque generated by the gravity of the cover is zero in the vertical direction, and the torque is large at the rear position of the buffer, so the cover cannot be closed.

 

0

 

2. When using the rotary buffer in the example shown in the figure, please calculate the required torque according to the following calculation method.

 

0

 

example:

Cover weight M: 5kg

The length L of the rotating shaft from the edge of the cover plate: 0.4m

Load torque: T=5×0.4×9.8÷2=9.8N•m

From the above calculation we choose the buffer as D45-104.

3. Please minimize the gap between the rotary shaft and the joint parts. If there is a gap, the speed of the cover plate will be affected when it is rotated and dropped.

4. The torque of the shock absorber also changes according to the change of the ambient temperature. The change rule is that when the ambient temperature increases, the torque decreases, and the action time is accelerated. When the ambient temperature decreases, the torque increases and the action time slows down. This is because the viscosity of the viscous oil also changes when the ambient temperature changes. But when the ambient temperature returns to normal temperature, the torque will also return to its original value.

5. The rotation angle of the buffer is 180 degrees. If the rotation exceeds 180 degrees, the buffer may be damaged. Please install a stop mechanism externally. The angle of action is based on the closed position.

 

0

Request Quote

If you want to inquire about our products, please fill out the form below, and we will contact you as soon as possible!

Submit
Related Products