N11 series rotary buffer
N11 series rotary buffer
-
Price
-
Minimum Quantity
1
| SKU | Standard | Type |
|---|---|---|
|
|
|
|
TAG:
Category:
Rotary buffer
Specification
| model | torque | reverse torque | Torque output direction |
|
N11B0-R102 |
0.1N·m (1Kgf.cm) |
0.03N·m (0.3kgf.cm) |
Clockwise direction |
|
N11B0-L102 |
0.1N·m (1Kgf.cm) |
0.03N·m (0.3kgf.cm) |
counterclockwise |
|
N11B0-R202 |
0.2N·m (2Kgf.cm) |
0.06N·m (0.6kgf.cm) |
Clockwise direction |
|
N11B0-L202 |
0.2N·m (2Kgf.cm) |
0.06N·m (0.6kgf.cm) |
counterclockwise |
|
N11B0-R302 |
0.3N·m (3Kgf.cm) |
0.1N·m (1kgf.cm) |
Clockwise direction |
|
N11B0-L302 |
0.3N·m (3Kgf.cm) |
0.1N·m (1kgf.cm) |
counterclockwise |
Note)
1. The specification torque is the data when the temperature is 23±2℃.
2. The white shaft is a clockwise torque output product, and the gray shaft is a clockwise torque output product
3. Special torque customization can be provided by changing the viscosity of the buffer grease or changing the material.
Performance description
| use angle |
110° |
| Operating temperature range |
-5~50℃ |
| Material of product housing and cover |
PBT |
| Rotary shaft material |
PBT |
| use oil | silicone oil |
Instructions
1. The closed position shown in the figure is the buffer end position, the torque output of the buffer is large at this angle, and this position is the buffer end installation reference.
2. The angle between the flat position installation reference of the rotating shaft and the positioning flat position on the other side of the body is 90°.
3. The rotation angle of the buffer is 110°. When the rotation exceeds the angle, the buffer itself will be damaged. Please design a stop positioning mechanism externally. 4. Please minimize the gap between the rotating shaft hole and the matching parts. Speed will be affected.
use industry
trash can industry
Dimensions

© 2026 Nimbr Technology Co.,Ltd. All Rights Reserved.