N20D1 Rotary Buffer
N20D1 Rotary Buffer
N20D1 Rotary Buffer
+
  • N20D1 Rotary Buffer
  • N20D1 Rotary Buffer
  • N20D1 Rotary Buffer

N20D1 Rotary Buffer

N20D1 Rotary Buffer

When the N20D1 series rotary buffer starts to fall from the vertical position as shown in Figure A to the horizontal position, since the designed torque is the weakest at the starting position, with the rotation of the buffer angle, the torque gradually increases, so the action of the cover can be slow at the end. close. As shown in Figure B, when the cover starts to fall from the horizontal position, the torque generated by the gravity of the cover is zero in the vertical direction, and the torque of the buffer is the largest in the final position, so the cover cannot be fully closed.
  • Price
  • Minimum Quantity
    1
  • Quantity
SKU Standard Type


TAG:

Category:

Rotary buffer

Product Specifications

 

model torque reverse torque Torque output direction

N20D(J)1-R103

1N·m

(10Kgf.cm)

0.3N·m

(3kgf.cm)

Clockwise direction

N20D(J)1-L103

1N·m

(10Kgf.cm)

0.3N·m

(3kgf.cm)

counterclockwise

N20D(J)1-R203

2N·m

(20Kgf.cm)

0.6N·m

(6kgf.cm)

Clockwise direction

N20D(J)1-L203

2N·m

(20Kgf.cm)

0.6N·m

(6kgf.cm)

counterclockwise

N20D(J)1-R303

3N·m

(30Kgf.cm)

1.0N·m

(10kgf.cm)

Clockwise direction

N20D(J)1-L303

3N·m

(30Kgf.cm)

1.0N·m

(10kgf.cm)

counterclockwise

Note (1) The specification torque is the data when the temperature is 23±2℃;

Note (2) The white end caps are counterclockwise torque output products, and the black end caps are clockwise torque output products;

Note (3) Special torque customization can be provided by changing the viscosity of the buffer viscous oil;

Note (4) "J" in the model number indicates that the rotating shaft is a product with a zinc alloy shaft.

 

Maximum use angle

110°

Operating temperature range

-5~50°

Rotary shaft material

PPS

Material of product housing and end caps

PBT

use oil silicone oil

 

Different installation specifications

 

 

 

N20D0

N20D1

N20D2

N20D3

N20D4

N20D5

N20J0

N20J1

Rotary shaft material

PPS

PPS

PPS

PPS

PPS

PPS

ZDC

ZDC

Rotation shaft length

20mm

20mm

10mm

10mm

25mm

25mm

20mm

20mm

Length of rear mounting position

3mm

5mm

3mm

5mm

3mm

5mm

3mm

5mm

product weight

14.6±1g

14.8±1g

10.3±1g

10.5±1g

11.5±1g

11.8±1g

26.5±1g

26.7±1g

 

Instructions for use

 

 

1. When the N20D1 series rotary buffer starts to fall from the vertical position as shown in Figure A to the horizontal position, since the designed torque is the weakest at the starting position, with the rotation of the buffer angle, the torque gradually increases, so the action of the cover can be Finally close slowly. As shown in Figure B, when the lid starts to fall from the horizontal position, the torque generated by the gravity of the lid is zero in the vertical direction, and the torque of the buffer is the largest in the final position, so the lid cannot be fully closed.

 

0

 

2. When using the rotary damper in the example shown in the figure, please calculate the required torque according to the following calculation method.

 

0

 

example:
Cover weight M: 1.5kg
The length L of the rotating shaft from the edge of the cover plate: 0.4m
Load torque: T=1.5×0.4×9.8÷2=2.9N•m
From the above calculation we select the buffer as N20D1-303.

3. Please minimize the gap between the rotary shaft and the joint parts. If there is a gap, the speed of the cover plate will be affected when it is rotated and dropped.

4. The torque of the shock absorber also changes according to the change of the ambient temperature. The change rule is that when the ambient temperature increases, the torque decreases, and the action time is accelerated. When the ambient temperature decreases, the torque increases and the action time slows down. This is because the viscosity of the viscous oil also changes when the ambient temperature changes. But when the ambient temperature returns to normal temperature, the torque will also return to its original value.

5. The rotation angle of the N20D1 series rotary buffer is 110 degrees. If the rotation exceeds 110 degrees, the buffer may be damaged. Please install a stop mechanism externally. The angle of action is based on the closed position.

6. The torque generating direction of the buffer varies according to the structure of the buffer. Please select the appropriate buffer according to different usage methods.

 

Dimensions

 

0

Request Quote

If you want to inquire about our products, please fill out the form below, and we will contact you as soon as possible!

Submit
Related Products