中文 | EN

1

N12 series rotary buffer

1. The closed position shown in the figure is the buffer end position, the torque output of the buffer is the largest at this angle, and this position is the buffer end installation reference. 2. The angle between the rotation flat installation reference and the housing boss is 0°. 3. The rotation angle of the buffer is 120°. If the rotation exceeds the angle, the buffer itself will be damaged. Please design a stop positioning mechanism externally. 4. Please minimize the gap between the rotating shaft hole and the mating parts. If there is a gap, the speed of the rotation buffer will be affected.

Category:

Rotary buffer

Hotline:

+86-755-8925 3101

Messages

Detailed

Commodity name: N12 series rotary buffer

Specification

model	torque	reverse torque	Torque output direction
N12A0-R103	1.0N·m (10Kgf.cm)	0.3N·m (3kgf.cm)	Clockwise direction
N12A0-L103	1.0N·m (10Kgf.cm)	0.3N·m (3kgf.cm)	counterclockwise
N12A0-R153	1.5N·m (15Kgf.cm)	0.4N·m (4kgf.cm)	Clockwise direction
N12A0-L153	1.5N·m (15Kgf.cm)	0.4N·m (4kgf.cm)	counterclockwise
N12A0-R203	2.0N·m (30Kgf.cm)	0.5N·m (5kgf.cm)	Clockwise direction
N12A0-L203	2.0N·m (20Kgf.cm)	0.5N·m (5kgf.cm)	counterclockwise

Note (1) The specification torque is the data when the temperature is 23±2℃.

Note (2) Special torque customization can be provided by changing the viscosity of the shock absorber grease or changing the material.

Performance description

Maximum use angle	120°
Maximum operating temperature range	-5~50℃
The material of the product shell	ZDC
Rotary shaft material	ZDC
use oil	silicone oil

Instructions

1. The closed position shown in the figure is the buffer end position, the torque output of the buffer is the largest at this angle, and this position is the buffer end installation reference.

2. The angle between the rotation flat installation reference and the housing boss is 0°.

3. The rotation angle of the buffer is 120°. If the rotation exceeds the angle, the buffer itself will be damaged. Please design a stop positioning mechanism externally.

4. Please minimize the gap between the rotating shaft hole and the mating parts. If there is a gap, the speed of the rotation buffer will be affected.

use industry

1. Washing machine industry

2. Sanitary ware industry

3. All kinds of medium-sized cover plates and other flipping industries

Dimensions

Keywords:

series
the
is
torque
buffer
of
angle
and
direction
rotation

Key words:

series the is torque buffer of angle and direction rotation