中文 | EN

1

N11 series rotary buffer

1. The closed position shown in the figure is the buffer end position, the torque output of the buffer is the largest at this angle, and this position is the buffer end installation reference. 2. The angle between the flat position installation reference of the rotating shaft and the positioning flat position on the other side of the body is 90°. 3. The rotation angle of the buffer is 110°. When the rotation exceeds the angle, the buffer itself will be damaged. Please design a stop positioning mechanism externally. 4. Please minimize the gap between the rotating shaft hole and the matching parts. Speed will be affected.

Category:

Rotary buffer

Hotline:

+86-755-8925 3101

Messages

Detailed

Commodity name: N11 series rotary buffer

Specification

model	torque	reverse torque	Torque output direction
N11B0-R102	0.1N·m (1Kgf.cm)	0.03N·m (0.3kgf.cm)	Clockwise direction
N11B0-L102	0.1N·m (1Kgf.cm)	0.03N·m (0.3kgf.cm)	counterclockwise
N11B0-R202	0.2N·m (2Kgf.cm)	0.06N·m (0.6kgf.cm)	Clockwise direction
N11B0-L202	0.2N·m (2Kgf.cm)	0.06N·m (0.6kgf.cm)	counterclockwise
N11B0-R302	0.3N·m (3Kgf.cm)	0.1N·m (1kgf.cm)	Clockwise direction
N11B0-L302	0.3N·m (3Kgf.cm)	0.1N·m (1kgf.cm)	counterclockwise

Note)

1. The specification torque is the data when the temperature is 23±2℃.

2. The white shaft is a clockwise torque output product, and the gray shaft is a clockwise torque output product

3. Special torque customization can be provided by changing the viscosity of the buffer grease or changing the material.

Performance description

use angle	110°
Operating temperature range	-5～50℃
Material of product housing and cover	PBT
Rotary shaft material	PBT
use oil	silicone oil

Instructions

1. The closed position shown in the figure is the buffer end position, the torque output of the buffer is large at this angle, and this position is the buffer end installation reference.

2. The angle between the flat position installation reference of the rotating shaft and the positioning flat position on the other side of the body is 90°.

3. The rotation angle of the buffer is 110°. When the rotation exceeds the angle, the buffer itself will be damaged. Please design a stop positioning mechanism externally. 4. Please minimize the gap between the rotating shaft hole and the matching parts. Speed will be affected.